DeLonghi ESAM 6620 Manuel d'utilisateur télécharger pdf (Page 21)

19

form, depending on the hardness of the water.

Each square corresponds to one level.

Level 1

Level 2

Level 3

Level 4

Set water hardness

1. Press the P button to enter the menu.

2. Press the button (corresponding to

the symbol ﬂashing on the display)

repeatedly until the menu arrow is on

“WATERHARDNESS”.

3. Press the button (corresponding to the

SET symbol ﬂashing on the display) until the

number displayed coincides with the number

of red squares on the test strip.

4. Press the OK button to conﬁrm the setting.

5. Press the P button (corresponding to the

ESC symbol ﬂashing on the display) to exit

programming mode or to change other

parameters.

The machine is now reprogrammed with the new

water hardness setting.

SETTING THE LANGUAGE

To change the language on the display, proceed

as follows:

• Pressthe OK button for at least 5 seconds

until the appliance displays the installation

message in various languages.

• Whenthelanguagerequiredappears,press

OK for 3 seconds.

TECHNICAL SPECIFICATION

Voltage: 120 V~ 60 Hz max. 10A

Absorbed power: 1350W

Pressure: 15 bars

Water tank capacity: 1,8 litres

Size LxHxD: 282x374x441 mm

Weight: 11,4Kg

Important! Danger of burns

Hot water containing acid ﬂows out of the hot

water spout.

Avoid contact with splashes of water.

7. Conﬁrm with the OK button.

8. The message “DESCALING IN PROGRESS”

is displayed. The descaling programme

starts and the descaler liquid comes out of

the water spout. The descale programme

automatically performs a series of rinses

and pauses to remove limescale deposits

from inside the machine.

Afterabout30minutes,themessage“RINSING...

FILLTANK!”isdisplayed.

9. The appliance is now ready for rinsing

through with clean water.

Remove the water tank, empty, rinse

under running water, ﬁll with clean water

and replace. “RINSING... PRESS OK” is

displayed.

10. Empty the container used to collect the

descaler solution and replace it under the hot

water spout.

11. Press the OK button to start rinsing. Hot

water ﬂows out of the spout and the message

“RINSING...”isdisplayed.

12. When the water tank is completely empty,

themessage“RINSINGCOMPLETE...PRESS

OK”isdisplayed.

13. Press the OK button, ﬁll the water tank and

the appliance is ready for use.

SETTING WATER HARDNESS

The DESCALE message is displayed after a

period of time established according to water

hardness.

The machine is factory set for a hardness value

of 4. The machine can also be programmed

according to the hardness of the mains water in

the various regions, varying the frequency with

which the message is displayed.

Measuring water hardness

1. Remove the “TOTAL HARDNESS TEST”

indicator paper from its pack.

2. Immerse the paper completely in a glass of

water for one second.

3. After about a minute, 1, 2, 3, or 4 red squares

1 2 ... 16 17 18 19 20 21 22 23 24 25

Commentaires sur ces manuels

Pas de commentaire