DeLonghi PAC A120E Spécifications télécharger pdf (Page 5)

The instructions below will enable you to prepare your air conditioner for operation as efficiently

as possible.

Before use, make sure the air intake and outlet grilles are unobstructed.

AIR-CONDITIONING WITHOUT INSTALLATION

Just a few simple steps and your comfort is

ensured with your air conditioner:

• Fit the air exhaust hose in the housing

at the back of the appliance.

Insert it as shown in figure A.

For optimum results:

• If you have a sash window, place the

bracket on the window sill, extend the

bracket fully within the window frame, fix the

bracket by using the pin then lower the win-

dow onto the bracket. Insert the window

outlet of the exhaust hose into the

slot, then connect the hose to the air condi-

tioner (fig. B ).

I NSTALLING YOUR PORTABLE

AIR-CONDITIONER

Keep the air hoses as short and free of

curves as possible to avoid constrictions

ELECTRICAL CONNECTIONS

Before plugging the appliance into the mains socket, check that:

• The mains power supply corresponds to the value indicated on the rating plate on the back of the appliance;

• The mains socket and electrical circuit are adequate for the appliance;

• The mains socket matches the plug. If this is not the case, have the plug replaced;

• The mains socket is adequately earthed.

Failure to follow these important safety instructions absolves the manufacturer of all liability.

The power cable must be replaced by a qualified professional only.

Thanks to the locking pins, it’s possible to

use the window bracket also for sliding

windows. Position the hole of the bracket

so to allow a correct installation of the

exhaust hose (see figure C).

• If you have a double window, use the

sucker provided to hold the two parts of

the window together (fig. D).

1 2 3 4 5 6 7 8 9 10 ... 17 18

Pas de commentaire

DeLonghi PAC A120E Spécifications Page 5