DeLonghi ESAM 6620 Manuel d'utilisateur télécharger pdf (Page 13)

Please note:

When using the appliance for the ﬁrst time,

you need to make 4-5 cups of coffee or 4-5

cappuccinos before the appliance starts to give

satisfactory results.

TURNING THE APPLIANCE ON

Please note:

Before turning the appliance on, make sure the

main switch at the back of the appliance is in the

I position (ﬁg. 1).

Each time the appliance is turned on, it performs

an automatic preheat and rinse cycle which

cannot be interrupted.

The appliance is ready for use only after

completion of this cycle.

Danger of burns!

During rinsing, a little hot water ﬂows from the

coffee spouts and is collected in the drip tray.

Avoid contact with splashes of water.

• To turn the appliance on, press the

button(g. 5).The message“HEATINGUP

PLEASEWAIT”isdisplayed.

After heating, the message “RINSING...” is

displayed. As well as heating the boiler, the

appliance also heats the internal circuits by

circulating hot water.

The appliance is at temperature when the

message“READY”isdisplayed.

TURNING THE APPLIANCE OFF

Each time the appliance is turned off, it performs

an automatic rinse cycle which cannot be

interrupted.

Danger of burns!

During rinsing, a little hot water ﬂows from the

coffee spouts.

Avoid contact with splashes of water.

To turn the appliance off, press the button

(ﬁg. 5). The appliance performs the rinse cycle

then goes off.

Please note:

If the appliance is not used for an extended

period, place the main switch on the back of the

appliance in the 0 position (ﬁg. 6).

CHANGING THE MENU SETTINGS

Press the P button to access the programming menu.

The following items can be selected: Clock, Auto-start,

Auto-start time, Descale, Temperature, Auto-off, Water

hardness, Default values, Beep ON/OFF, Energy saving.

Energy Saving

Use this function to enable or disable energy sa-

ving mode.

When enabled, the function reduces energy con-

sumption.

• Press the P button.

• Press the button (corresponding to the

symbol ﬂashing on the display) repeat-

edly until the menu arrow is on “ENERGY

SAVING”.

• Press the button (corresponding to the

SET symbol ﬂashing on the display) to modify

the function (the appliance displays ENERGY

SAVING YES or ENERGY SAVING NO);

• PresstheOK button to conﬁrm the function;

• PresstheP icon to exit the menu.

When the function is enabled, if the appliance is

notusedforabout1minute,“EnergySaving”is

displayed.

Please note:

• Afewsecondsmayelapsebetween“Energy

Saving”modeanddeliveryoftherstdrink.

This is indicated by the display of the messa-

ge“Preparationinprogress”.

• When “Energy Saving” is disabled, the ap-

pliance turns the cup warmer on automati-

cally.

Setting the clock

To set the time displayed, proceed as follows:

• PresstheP button.

• Pressthe button (corresponding to the

SET symbol ﬂashing on the display) to set

the time on the clock. (If you hold the button

down, the time changes rapidly).

• PresstheOK button to conﬁrm;

• Press the P button (corresponding to the

ESC symbol ﬂashing on the display) to exit

programming mode or to change other

parameters.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 24 25

Commentaires sur ces manuels

Pas de commentaire

DeLonghi ESAM 6620 Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Cafetières DeLonghi ESAM 6620