DeLonghi PAC 700T Manuel d'instructions télécharger pdf (Page 4)

ENGLISH

Setting up

AIR CONDITIONING WITH INSTALLATION

For more efficient use Pinguino can also be

semi-permanently installed (Fig, G)

• Fit the flange supplied to the hole.

• Fix the hose to the coupling on

the back of the unit (figure A).

• Attach the end of the hose to the flan-

ge as shown in the figure I.

825

To install, proceed as follows:

• Make a hole in a outside wall or through

the glass of a window. Check the height

and dimensions given in figure H

12"

30 cm

100

MAX 47" (120 cm)

MIN 12" (30 cm)

When the hose is not attached, close the

hole with the stopper on the flange .

NOTE:

When the unit is installed semi-permanently,

we recommend leaving a door slightly open

(1cm (1/2”) is enough) to ensure an adequa-

te exchange of air.

in a window

pane

in the wall: for

optimum results,

insulate the sec-

tion of the wall

with suitable insu-

lating material.

in the

wood sill of

a window

If you have a sliding door, use the additional set

provided in order to extend the accessory to

the desired length; joining the two parts (fig. E),

adjust the total length according to your needs,

then fit the bracket with the relevant nuts, close

the door and connect the hose (fig. F).

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

DeLonghi PAC 700T Manuel d'instructions Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Climatiseurs à système divisé DeLonghi PAC 700T